type: quantit y: project: catalog number: fixtu re watta ge volta ge finish option option option option materials eclipse is made of corrosion resistant 356 aluminum alloy with a copper (cu) content of less than 0.1%. led printed circuit board is assembled with a cast aluminum heat sink designed with fins pattern to optimize heat dissipation and luminaire efficacy. the structural support arms are made with a built-in wire way. the driver is enclosed in a separate cast aluminum chamber with a tool-less hinge mechanism allowing a quick access for electrical maintenance without disturbing the optical light chamber. the lower cast aluminum housing fits on a 4 (102) or 5 (127) pole and contains all electrical controls on a removable tray. electrical led driver 120/277v multi volt (50-60hz) with a minimum starting temperature of -30oc/-22of. optional 347v on request. output over voltage, output over current and output short circuit protection with auto-recovery. over temperature protection (110oc). led standard 4000ok led platform included. optional 3000ok and 3500ok. removable modular led platform. life 51,000hrs l 77 b 50 (based on iesna tm-21 test method and lm-80 data). 68,000hrs l 70 b 50 (calculated projection from lm-80 data). finish five-stage preparation process including preheating of cast parts for air extraction, and an environmentally friendly alloy sealant. polyester powder coating is applied through an electrostatic process and oven cured for long term finish. mounting maximum weight : 44lbs (20kg) eclipse is designed for ease of access and installation. standard luminaire fits on a 4 (102) or 5 (127) pole. alternate poles or wall attachments are proposed with high quality components to meet multiple installation conditions. certification tested to ul1598 and csa 22.2 #250. etl listed wet location. photometric testing performed by an independent laboratory in accordance with ies lm-79-08 standards at 25oc. lumen depreciation in accordance with iesna lm80 standards. ce certification on request. rated ip65. 1 1 3 5 2 4 7 6 eclipse features a unique tool-less swing out shade assembly, allowing a quick access to luminaire maintenance, leaving a clean optical chamber to ensure a high lumen performance. access to electrical components W732 series eclipse - led 1- 36 dia. (915) x 3/16 (5) thick aluminum reflector disc with two sides painted white enamel. 2- set of two cast aluminum supporting struts. 3- led sealed optical beam control lens. 4- cast aluminum led heat sink. 5- cast aluminum assembly base support with hinged mechanism. 6- 120/277v or 347v electronic driver (optional). 7- lower cast aluminum housing with 4 or 5 (102 or 127) pole adaptor. oct 2014 rev 0 W732 W732-t15 27 (686) 30 (762) W732 epa: .70 15o W732-t15 epa: 1.87 luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
2 W732 series eclipse - led oct 2014 rev 0 outdoor report polar graph maximum candela = 588 located at 20 o W732-l1w65r1 please visit our web site www.luminis.com for complete i.e.s. formatted download data. typica l photometry summary standard colors wht snow white bkt jet black bzt bronze mst matte silver grt titanium gray dgt gun metal cht champagne optional colors cs custom color ral ral# color (refer to color chart) 120v 277v optional 347v model# led light selection voltage 1 finish suffix l1w65r1 input watts 60w delivered lumens 4892 cri 80 cct ok 4000 ok W732 W732-t15 luminai re selection notes 1- luminaires are factory prewired for 120v (if no voltage is specified.) for other voltages, please specify with catalog number, or consult factory. 2- fuse and photo cell options are normally installed with poles when specified with luminis luminaires. (except for other types of mounting.) mounting electrical accessories aca pole mounted attachment with 45o support acw wall mounted attachment with 45o support ec3p pole mounted twin arm attachment ec3w wall mounted twin arm attachment tn3 3 tenon pole adaptor pr7 pedestal mount adaptor sq 36 square aluminum white enamel reflector sq15 36 sqaure aluminum white enaml reflector wirh 15o tilt fs fuse 2 ph photocell 2 347l 347v input power driver alternate cct ok led k3 3000ok cct led k35 35 00ok cct led options descriptive information total lms: 4892 lumens total input watts: 59.99 w source: led total efficiency: 81.55% bug rating: b2-u3-g1 cutoff classification: cutoff distribution: type v cct/cri: 4000ok / 80 cri luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
3 paa pole series psb pole series pst pole series 28 (711) 36 (914) 30 (762) 17.75 (451) 12 (304) 22 (558) 31.75 (807) power feed power feed W732 series eclipse - led oct 2014 rev 0 (3) 5/8 dia. (16) mounting holes @120o 6 dia. (152) bolt circle 2 dia. (51) power entry 8 dia. (203) base pole mo unt aca 1 1 x 3 extruded aluminum extended arm pole mounting adaptor designed to fit with 4 to 5 dia. poles. 1/2 dia. x 45o standard natural stainless steel rod support. (epa: 0.7) ec3p 1 set of (2) 1 x 3 extruded aluminum side pole straight mounting. designed for luminaires with or less shades. pole mounting adaptor fits with 4 to 5 dia. poles. (epa: 0.97) pr7 8 dia.(203) x 8 3/4 (222)h. extruded aluminum stand designed for short walls or pier mount. note 1 : pca pole with aca attachment requires a 30 (762) tenon extension over pole nominal height. ec3p and ec3ps require an 18 tenon extension. factory installed. ? 4 ? 5 ? 4 tapered ? 4 height pole paa410 paa510 ps t10 ------- psb 10 10 ft. (3 m) paa412 paa512 ps t12 ------- psb 12 12 ft. (3,6 m) paa414 paa514 ps t14 ------- psb 14 14 ft. (4,2 m) paa416 paa516 pst16 pta16 psb 16 16 ft. (4,8 m) paa418 p aa518 ------- pta18 psb 18 18 ft. (5,5 m) paa420 p aa520 ------- pta20 psb20 20 ft. (6,0 m) ------- ------- ------- p ta25 ------- 25 ft. (7,6 m) for additional pole details, please refer to separate pole specification sheet. ? 4= 100mm ?5= 127mm matchin g pole selection 36 (914) luminaires may be altered for design improvements or discontinued without prior notice. unless specified, lamps are not included with luminaires. luminis.com luminis toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5
4 20 (508) power feed 28 (711) 36 (914) power feed W732 series eclipse - led oct 2014 rev 0 4 . 6 2 5 (118) 3 (76) 1 7 . 7 5 (451) power feed 3 (76) 4 . 6 2 5 (118) power feed 6 . 1 2 5 (156) wall mount accessories acw 1 x 3 (25x76) extruded aluminum extended arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2 dia. x 45o standard natural stainless steel rod support. ec3w set of (2) 1 x 3 (25x76) extruded aluminum wall mount arms with cast aluminum wall plate. designed for luminaires with or less shades. mounting mounting sq 36x36 x 3/16 thick aluminum reflector plate. two sides painted white enamel. luminaire epa: 0.75 sq15 36x36 x 3/16 thick aluminum square reflector plate with 15o tilt. two sides painted white enamel. luminaire epa: 2.17 36 (914) luminaires may be altered for design improvement or discontinued without prior notice. unless specified, lamps are not included with luminaires. toll free: 866.586.4647 fax: 514.683.8872 260 labrosse, pointe-claire (qc) canada h9r 5l5 luminis.com luminis
|
